Can-Am Spyder F3-T 2017
Can-Am Spyder F3-T 2017
Can-Am Spyder F3-T 2017
Can-Am Spyder RT 2017
For your Spyder
Each bottle contains enough Ride-On to treat an average small to medium car tire. Please refer to our dosage table for exact dosages required for your tire size.
The Ride-On Tire Protection System (TPS) Auto formula tire sealant is designed for use in cars, light trucks, SUVs, RVs, and trailers operating at speeds in excess of 30 miles per hour (50 km/h). The Auto formula will seal punctures in tubeless tires from perforating objects up to 1/4" in diameter (1/8" in tube tires) that enter the tread area of the tire. Ride-On TPS Auto formula helps balance your tires to give you a smoother ride. It is compatible with most tire inflation systems (TPMS) and will not plug your valve stems. NO OTHER SEALANT CAN MAKE THAT CLAIM!
The Ride-On TPS Auto formula tire sealant is a revolutionary gel that helps balance tires and turn them into self-sealing tires using fibers that are six times stronger than steel. Auto formula tire sealant helps tires maintain their pressure up to 500% better than untreated tires. Properly inflated tires that are balanced run cooler and last longer. Less flexing, bounce and fatigue equal longer tire life - up to 25% or more!
The dosages shown on the bottle label represent more than 80% of the most common tire sizes in use today. You can view our complete dosage table by visiting our website www.ride-on.com.
Atlas Throttle Lock for the Can Am Ryker
One of the most popular aftermarket products we sell for the Can-Am Ryker is our keyed parking brake lock. This product allows you to lock your Ryker parking brake lever in place so that your Ryker doesn't roll away or get stolen. We now have a billet aluminum parking brake lever that replaces your factory plastic lever. This billet aluminum lever takes your Ryker parking brake and turns it into a security device when paired with our Ryker parking brake lock. It uses all the factory mounting points of the stock lever and of course is made here in the U.S.A.
If you own a Can-Am Spyder F3 / F3-S / F3-T or F3 Limited and would like your passenger to be able to charge their smart phone device while riding this is the product for you. This dual 12V USB power station is 100% Plug N Play and plugs directly into the 12V accessory power port that can be found under your F3 passenger seat. If you own an F3 Limited, the power plug under your seat is already being used to power the USB ports in your rear trunk, so we include a "Y" harness F3 Limited models so that you can power both your factory trunk USB ports as well as your new passenger power station. Each USB port on the power station is 5V / 2.1A so that you can charge your devices quickly ensuring that your devices are charged and ready to go once you arrive at your destination. When not in use the power station features a rubber cap that protects the USB ports from the elements
Our new tubular steel Grille Guard for the Can-Am Ryker is powder coated in a "satin" black finish to compliment the Ryker's body panels. The grille guard not only looks stylish but also extends the front end of the Ryker adding some protection to the factory grille, especially for those of you that plan on using your Ryker Rally to its full potential.
The Grille Guard also features an optional 12" LED light bar that bolts directly up to the grille guard and features a plug and play "handlebar" mounted on/off switch. The switch allows you to run the LED light bar in "low" mode which is perfect for a DRL (Daytime Running Light) or "high" mode which will light up the road ahead when ripping through the canyons on those dark summer nights. The light can also be set to the center position of the switch to turn it "off".
The factory shift lever that comes with the Can-Am Ryker is functional.. but doesn't fit the aggressive look of this reverse trike. Our Billet Aluminum Forward / Reverse shift lever not only looks the part but features a diamond foot pattern on the backside of the shift lever allowing you to push the shift lever forward into drive as well as finger inserts on the front side allowing you to also use your hand to pull the lever back into reverse. The installation is a snap and includes a stainless steel bolt to fasten to the factory Ryker shift linkage.
The Can-Am Ryker is by far the coolest 3 wheeler to come out of camp Can-Am in our opinion. The bare bones Ryker is what makes it affordable, but it's also what leaves it a trike that yearns for mods to meet those creature comforts we're all accustomed to. This SpyderExtras docking station clamps to the factory Ryker handlebars so that you can adapt your Smart Phone / GPS system directly to the bars. The system also comes with a 12V cigarette lighter as well as a dual port 2.1 amp USB charge port so that you can keep your device charges as you ride. There are 4 slots on each side to allow you to adapt the included Ram Mount tough ball for easy mounting of your smart device.
The “12V Cell Phone / GPS Docking Station with JBL Bluetooth Speakers” is an essential mod kit for the Can-Am Ryker to improve audio performance and user interface accessibility. The docking station is mounted to the center of the Ryker's handlebars and sports a 12v cigarette lighter, as well as a 2.1 amp dual port usb charge port. The JBL Bluetooth Speakers bolt onto the docking station where they provide 40 watts of high quality digital audio for exceptional audio quality in the most obtrusive of on-road environments. The speakers are waterproof to accommodate their outdoor use, and their Bluetooth compatibility keeps the interface of the Ryker free of unnecessary wires. They also boast an "auto-off" feature that helps to conserve the Ryker's battery life when the speakers are not in use. The “12V Cell Phone / GPS Docking Station with JBL Bluetooth Speakers” is exceptionally useful for managing electrical devices as well as keeping everything fully charged while on the road. Riders are able to listen to their favorite audio programs without resorting to headphones, which are notorious for limiting a rider's ability to react to dangerous situations while driving. Overall this is an extremely versatile kit that accommodates nearly every electrical device and essential need that drivers wish to access while on the road.
If you have a Can-Am Spyder F3, F3S or F3T model and would like to upgrade from your stock rubber foot pegs to laser cut steel floorboards for either the front, rear or both, then this conversion kit may be for you.
Can am spyder Belt Idler / Tensioner by Spyder Extras
One of the issues we've noticed with the Can-Am Spyder RT is that belt vibration occurs when the Spyder drivetrain is under load. Some examples of when belt vibration may occur are when you're riding with a passenger, climbing a steep incline or pulling a trailer. The Spyder Extras Billet Aluminum Belt Tensioner drastically reduces belt vibration by applying smooth spring loaded tension to the drive belt. This RT tensioner is 2" longer than the factory plastic Can-Am idler for superior damping. This tensioner also features Dual Sealed Duty Roller Bearings and an Oilite Bronze Bushing at the pivot point for smooth, non binding operation. All mounting hardware is included for a straight forward installation.
Order here: https://www.slingmods.com/can-am-spyder-rt-belt-tensioner-idler-billet-aluminum-spyder-extras
Introducing our 3-Piece Touring Luggage System for the Can-am Ryker & Ryker Rally. This is our favorite mod to date for the Can-Am Ryker as it brings the Ryker one step closer to it's Spyder brethren in terms of touring functionality at just a fraction of the price. This three Piece luggage system includes all necessary hardware to mount 2 lockable, quick release saddlebags to each side of the Ryker, as well as a removable locking top trunk case. The excitement doesn't stop there as we've also loaded these bags up with DRL (Daytime Running Lights), Brake Lights & Turn Signal Functionality drastically increasing your likeliness of being seen while out on the open road. Best of all, they've been designed to run in conjunction with the passenger seat so you don't tour alone if you don't want to.
One of the issues we've noticed with the Can-Am Spyder F3 is that belt vibration occurs when the Spyder drivetrain is under load. Some examples of when belt vibration may occur are when you're riding with a passenger, climbing a steep incline or pulling a trailer. The Spyder Extras Billet Aluminum Belt Tensioner drastically reduces belt vibration by applying smooth spring loaded tension to the drive belt. This F3 tensioner is 2" longer than the factory plastic Can-Am idler for superior damping. This tensioner also features Dual Sealed Duty Roller Bearings and an Oilite Bronze Bushing at the pivot point for smooth, non binding operation.
Order here: https://www.slingmods.com/can-am-spyder-f3-belt-tensioner-idler-billet-aluminum-spyder-extras
Ryker docking station and mounted speakers for the can am ryker
Order here: https://www.slingmods.com/can-am-ryker-cell-phone-docking-station-jbl-bluetooth-speakers
Customer review of the ryker JBL speaker and docking station combo Ryker-1U12-JBL
NEW! 2020 - 2021 DUAL HORN KIT FOR THE CAN AM SPYDER RT AND SPYDER RT LIMITED.
The last thing a rider wants to do when riding their 2020+ Can-Am Spyder RT is be fumbling around with their cell phone for updated directions to their destination point. This aluminum docking station by SpyderExtras is the perfect solution to solve this problem. It mounts to the center handlebar clamp and includes (1) Dual USB Charge Port & (1) 12V cigarette lighter style charging station. The kits also includes a Ram Mount Tough Ball so that you can mount up your cell phone or gps for hands free navigation. The Spyder RT docking station is 100% bolt on and is powder coated black for protection against the elements. We have an optional Ram Mount X-Grip with extension arm available to fit most phones on the market (sold separately)
One of the things we really like about the Can-Am Ryker is that you're able to adjust the factory foot pegs to accommodate different leg lengths and riding styles, but we noticed after long distance rides, that the foot pegs can get a bit uncomfortable. To address this issue, we've partnered up with our friends over at Spyder extras to bring you an adjustable set of floorboards that keep the factory adjustment features in place, allowing you to fine tune the boards to accommodate your most comfortable foot position while riding. The floorboards are available with either a black floorboard plate or silver floorboard plate, depending on the look you're going for.
Introducing our LED Driving Light Bar for the 2020+ Can-Am Spyder RT & RT Limited. This kit features a 10" LED Light bar that emits a bright white light, that comes in at 6000k on the kelvin scale. The light bar mounting bracket is adjustable so that you can fine tune the position of the light bar itself. The kit also includes an OEM style waterproof dash switch that allows you to turn on/off the light bar at any time once the ignition is powered on.
Now if you've never ridden with an LED light bar, you're gonna love this mod. This LED Light bar drastically increases your visibility of the road ahead while riding at night. The extra light output allows you to see further down the road, so that you have more time to react to a potential road hazard that may lie ahead. Not only does it enhance your ability to see what's up ahead, but it also increases your likeliness of being seen by oncoming vehicles during the day and night.